Base Plates ONLY
Please inquire if you are unsure what you need. Most times using other companies or stock engine mounts (that bolt to block) and use with my baseplates won't always give you the proper setback. The 4.3 and the 41-46 plates are the exception.
If you are doing an SBC or LS ADs10 Swap, you would want my upper mounts that come with baseplates and hardware kit. (They have setback in them also)
4.3 baseplates now have two settings so you can use them with LS and SBC engines by moving the bushings forward on the baseplates. The 41-46 baseplates are the longest I offer and should give you plenty of room with use of most any top motor mount.
The benefit of using my top motor mounts (that bolt to block) is they have two height settings. Most standard LS or SBC motor mounts or kits, are not designed for doing the AD S10 swap or a 41-46 s10 swap.
3 options are standard baseplates used with LS or SBC, 4.3 baseplates, and the 41-46 baseplates. Prices are $50, $60 and $65 shipped.
NO bushings included. NO hardware included. If you want to do a standard LS or SBC swap I highly recommend getting my motor mount kit and not trying to piece together a kit with other top mounts.
1st three photos are 4.3, 2 photos are the 41-46 and the black frame is a standard LS/SBC baseplate.